Test Results
558 88000 Series
Summary (FlexE BERT)
Pattern FlexE Client and FlexE Clients
The Pass/Fail verdict is displayed when enabled.
The Pattern FlexE Client verdict is declared if any Bit Error, Pattern
Loss, Ethernet alarm, or FCS error occurs.
A FlexE Client verdict is declared if any Ethernet alarm or FCS error
occurs.
Client ID indicates the client identification number and allows
displaying the client’s summary page for the Client ID associated to the
pattern (refer to Summary / Client Summary on page 531).
Size indicates the rate of the client in Gbit/s.
Link Alarm indicates respectively, from left to right, the history and
current client link status (Link Down).
TX Rate indicates the client transmitted rate in Gbit/s.
RX Rate indicates the client received rate in Gbit/s.
RX Frame Count indicates the total number of received valid and
invalid frames.
Bit Error Rate indicates the bit error rate.
Bit Error Count indicates the bit error count.
To Next Page
