Test Setup - Test Configurator, Timer, and System
Power Blazer 187
EtherBERT, FC BERT, BERT (eCPRI, CPRI/OBSAI, and FlexE), and Unframed BERT
FC Frame
Note: Only available with FC BERT.
Frame Size (Bytes) allows entering the frame size (in step of 4 bytes) for
FC BERT test application: 40 to 2148 bytes (default). However the
minimum frame size is 64 bytes when the Latency Tag check box is
selected.
Latency Tag Insertion
Note: Only available with FC BERT.
Round trip latency measures the average round trip latency (delay)
between the time the data was transmitted and received.
Latency Tag check box when selected enables latency
measurements.
Pass/Fail Verdict check box when selected enables the pass/fail
verdict and allows setting the Round-Trip Latency Threshold.
Round-Trip Latency Threshold (ms) allows the selection of the round
trip latency: 0.015 (default) to 8000 ms.
To Next Page
