Test Setup - Test Configurator, Timer, and System
Power Blazer 239
Labels
VT/TU Path (V5): The V5 byte is allocated to indicate the content of the
VT/TU path, including the status of the mapped payloads.
Generated: Select the V5 byte from the list. Selecting a V5 byte value
will automatically update the OH V5 selection and vice versa. Refer to
V5 on page 677 for more information.
PLM-V/UNEQ-V / LP-PLM/LP-UNEQ: Enables the Payload Mismatch
and VT/TU UNEQ monitoring. This setting is coupled with the
configuration on the Labels on page 488.
Expected: Select the expected V5 byte from the list. Refer to V5 on
page 677 for more information.
To Next Page
Loading...
