Test Setup - Test Configurator, Timer, and System
282 88000 Series
ODU Channels - Global
Channel Summary
Channel ID / Type table indicates each channel number with its ODU
mapping type.
Payload Type indicates the mapped ODU payload type.
Quantity of Channels indicates the number of channels part of the
test.
Unused Capacity indicates the number of tributary slot not used;
either configured as background traffic or Unallocated.
Modify Trib Slots/Channels
Channel ID selects a channel number highlighting the tributary
slots composing this channel. Alternatively, selecting a channel
from the table on the right (TX, RX, or TX = RX tab) also selects a
channel number.
Tributary Port indicates the tributary port number associated to
the channel number.
Payload Type indicates the payload type for the mapped OPU.
RX, TX, or TX = RX tab (table on the right) displays the tributary
slot assignments per channel for either RX, TX, or both RX and TX
(TX=RX) and allows selecting tributary slots to be
assigned/unassigned; see Assign/Unassign/Mode for more
information.
Each tributary slot displays its number (left top corner) and
channel number (middle); the channel number is replaced by B or
U indicating respectively if the tributary slot carries background
traffic or is configured as Unallocated.
To Next Page
