Test Results
Power Blazer 417
Alarms/Errors Overview
RPF (Remote PHY Fault)
RX: The RPF bit is set in the OH.
Excessive Instance Skew
RX: The current skew is above the configured Instance Skew Alarm
threshold. The Excessive Instance Skew condition corresponds to a
Loss of lane alignment defect (LOL) as mentioned in the standard.
Errors
MFAS (Multiframe Alignment Signal)
RX: Received OH MFAS does not match the expected MFAS value.
OH CRC
RX: OH received with an invalid CRC.
To Next Page
