Test Results
Power Blazer 497
Messages
For eCPRI: The count of each eCPRI message type is reported.
RX Frame Clock Burst Details
When a valid Frame Clock Burst (FCB) message is received, its SFN and c1
values are reported. Only available with OBSAI.
SFN (System Frame Number): The master frame number received with
an FCB message.
c1: Arrival time of the FCB message Reference Point 1 (RP1) versus
master frame start.
Message Type TX Count RX Count Loss Count OOS Count
IQ Data XXXX
Bit Sequence XXXX
Real-Time Control Data XXXX
Generic Data Transfer XXXX
Remote Memory Access -X- -
One-Way Delay Measurement X X - -
Remote Reset -X- -
Event Indication -X--
Reserved -X--
Vendor Specific -X- -
Tot al XXXX
To Next Page
