EXFO Power Blazer - Page 602

Test Results
592 88000 Series
Summary (Wander)
Time Error Statistics
Note: The following statistics are collected using 0.1 Hz Low-Pass filtering. The
following statistics are available with 1PPS signal.
 TE (ns) indicates the last time error value collected in the last second.
 Max TE (ns) indicates the maximum time error value collected since
the beginning of the test.
 Min TE (ns) indicates the minimum time error value collected since
the beginning of the test.
 Max Absolute TE (ns) indicates the maximum absolute time error
value collected since the beginning of the test. The pass/fail verdict is
also displayed when enabled.
Note: The following statistics are collected using 0.1 Hz High-Pass filtering.
 dTE
H
pk-pk (ns) indicates the dynamic time error peak-to-peak over a
defined observation period (refer to dTE
H
Observation Period on
page 383). The values are updated every second.
 Max dTE
H
pk-pk (ns) indicates maximum dynamic time error
peak-to-peak since the beginning of the test. The pass/fail verdict is
also displayed when enabled.