Fagor CNC 8070 - Real coordinates; Real coordinates with enlarged error; Simulation speed



 Programming manual
CNC 8070
TOOL COMPENSATION
Tool radius compensation
9.
(SOFT V02.0X)
163
When the angle between paths is greater than 180º, the way radius
compensation is activated depends on the functions selected for type
of beginning (G138/G139) and type of transition (G136/G137).
STRAIGHT-TO-ARC path
When the angle between the straight path and the tangent of the arc
is smaller than or equal to 180º, the way radius compensation is
activated is independent from the functions G136/G137 and G138/
G139 selected.
G139/G136 G139/G137 G138
180º < α < 270º 180º < α < 270º 180º < α < 270º
α = 270º α = 270º α = 270º
270º < α < 360º 270º < α < 360º 270º < α < 360º
0º < α < 90º α = 90º
90º < α < 180º α = 180º