Programming manual
326
CNC 8070
12.
CYCLE EDITOR
Circular pocket
(SOFT V02.0X)
268
Spindle turning direction (icon).
Clockwise with icon
(a)
.
Counterclockwise with icon
(b)
.
Machining direction (icon).
Clockwise with icon
(c)
.
Counterclockwise with icon
(d)
.
Basic operation:
1. It selects the roughing tool and starts the spindle in the requested
direction.
2. Rapid movement (G0) to the center of the pocket and the safety
plane (Zs).
Depending on the starting plane, it first moves in XY and then in
Z or vice versa.
3. Rapid movement (G0) up to the approach plane.
T Finishing tool.
If programmed T=0, there is no finishing.
D Tool offset.
(b)(a)
(d)(c)
To Next Page
Loading...
