Hardware configuration.
CNC 8070
8.
LCD-15SVGA. PASSIVE MONITOR " LCD15-SVGA".
Possible configurations.
·176·
(REF: 1911)
8.1 Possible configurations.
The passive screen and the MCU central unit.
The passive screen permits having a work station consisting of the screen itself, a keyboard
and an operator panel. Connect the softkeys of the screen to the keyboard and the ·VGA·
signal to the central unit. Connect the keyboard and the operator panel to the CAN bus of
the system.
The passive screen and the ICU central unit.
The passive screen permits having a second work station consisting of the screen itself and
an operator panel OP-PANEL-H/E. Connect the softkeys of the screen to the keyboard and
the ·VGA· signal to the central unit. Connect the keyboard and the operator panel to the CAN
bus of the system.
To Next Page
Loading...
