FARGO electronics HDP600 - Page 140

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
5-2
Specifying UDP Event logging (continued) _________________________________________ 5-37
Specifying TCP Event logging ______________________________________________________ 5-38
Specifying TCP Event logging (continued)__________________________________________ 5-39
Using the Administration pages _______________________________________________________ 5-40
Using the System Information page __________________________________________________ 5-40
Using the System Information page (continued) ______________________________________ 5-41
Changing the Root Password _______________________________________________________ 5-42
Changing the Root Password (continued) ___________________________________________ 5-43
Upgrading the Print Server_________________________________________________________ 5-44
Upgrading the DTC400 and HDP600 Print Server (continued)___________________________ 5-45
Using the Reboot pages______________________________________________________________ 5-46
Rebooting the Ethernet Server ______________________________________________________ 5-46
Rebooting the Ethernet Server (continued)__________________________________________ 5-47
Resetting to Default Settings _______________________________________________________ 5-48
Using the Help page ________________________________________________________________ 5-49
Additional Procedures ________________________________________________________5-50
Reviewing LED and Dipswitch Tables __________________________________________________ 5-50
Reviewing the LED Table _________________________________________________________ 5-50
Reviewing the Dip Switches________________________________________________________ 5-51
Restoring the Factory Settings for Ethernet ______________________________________________ 5-52
Restoring the Default Settings ______________________________________________________ 5-52
Accessing the IP address of your Printer_________________________________________________ 5-53
Accessing the HDP600 IP address ___________________________________________________ 5-53
Upgrading the Main Firmware with the Fargo Diagnostics Utility_____________________________ 5-54
Upgrading the Main Firmware with the Fargo Diagnostics Utility (continued) ______________ 5-55
Ethernet Printer Troubleshooting Procedures_____________________________________5-56
Troubleshooting procedures ________________________________________________________ 5-56
Verifying the Printer Connection ____________________________________________________ 5-57
Verifying the Printer IP address _____________________________________________________ 5-57
Verifying that your PC can access the Printer using the ping command ______________________ 5-58
Verifying that your PC can access the Printer using the ping command (continued) __________ 5-59
Printing a test page _______________________________________________________________ 5-59
Reviewing Frequently-asked Questions __________________________________________5-60
Reviewing Frequently-asked Questions (continued) ___________________________________ 5-61
Reviewing Frequently-asked Questions (continued) ___________________________________ 5-62
Reviewing Frequently-asked Questions (continued) ___________________________________ 5-63
Reviewing Frequently-asked Questions (continued) ___________________________________ 5-64
Reviewing Frequently-asked Questions (continued) ___________________________________ 5-65
Glossary of Terms ____________________________________________________________5-66
Glossary of Terms (continued) ___________________________________________________ 5-67