RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
12-3
Downloading Firmware Updates
Step Procedure
1 Refer to the following steps to download Firmware updates:
2
Select the Download Firmware button. If you have Internet access, this will
automatically take you to the Firmware Updates section of the Fargo website.
If it does not, Guidely open your browser and go to the Firmware Updates
section in the Fargo Electronics Technical Support Web site:
http://www.fargo.com/tech_support/
3
Select your specific Printer model and click on the Submit button. Click on
the Firmware file link labeled for the specific Printer model.
4
Click on OK when prompted to Save this Program to Disk and then select a
folder in which to save the Update file.
5 a. Once the file has been downloaded, navigate to the location where the
file was saved. (Note: The Firmware Update file has been compressed
for ease of downloading.)
b. Decompress the file by double-clicking on the designated icon.
To Next Page
Loading...
