RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
2-1
Section 2: Specifications
The purpose of this section is to provide the User with specific information on the Regulatory
Compliances, Agency Listings, Technical Specifications and Functional Specifications for the
HDP600, HDP600-LC, HDP600 CR100 and HDP600-LC CR100 card Printers.
Table of Contents
Section 2: Specifications 2-1
Table of Contents 2-1
Safety Messages (review carefully) 2-2
Introduction 2-3
Reviewing the HDP600 Printer Overview table 2-3
Reviewing the HDP600 Package 2-4
Reviewing the HDP600 (front) 2-4
Reviewing the HDP600 CR100 Card Printer 2-5
HDP600 - Regulatory Compliances 2-6
HDP600 - Agency Listings 2-6
Technical Specifications 2-7
Technical Specifications (continued) 2-8
Technical Specifications (continued) 2-9
Technical Specifications (continued) 2-10
Technical Specifications (continued) 2-11
Technical Specifications (continued) 2-12
Technical Specifications (continued) 2-13
Functional Specifications 2-14
Printer Components: Resin Thermal Transfer to USB Interface Port 2-15
Printer Components: Resin Thermal Transfer to USB Interface Port (continued) 2-16
Printer Components: LCD and Softkey Control Pad 2-17
Printer Components: LCD and Softkey Control Pad (continued) 2-18
Printer Components: LCD and Softkey Control Pad (continued) 2-19
Printer Components: LCD and Softkey Control Pad (continued) 2-20
Printer Components: LCD and Softkey Control Pad (continued) 2-21
Printer Components: Print Ribbons 2-22
Printer Components: Blank Cards 2-23
Printer Components: Card Input and Output Hoppers 2-24
Printer Components: Card Output Hopper and Reject Hopper 2-25
Printer Unit: Reviewing the Card Lamination Module 2-26
Printer Components: Transfer Roller 2-27
Reviewing the Overlaminates 2-28
Reviewing the Thermal Transfer Film and PolyGuard Overlaminates 2-28
Reviewing the CR-90 or CR-100 Patch Size 2-29
Reviewing the Overlaminate Design 2-29
To Next Page
Loading...
