FARGO electronics HDP600 - Section 6: Card Lamination Module; Table of Contents

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
6-1
Section 6: Card Lamination Module
Important: The procedures in this section apply for the HDP600/HDP600-LC and
HDP600 CR100/HDP600-LC CR100 card Printers.
The purpose of this section is to provide the User with specific information on Printer
adjustment procedures.
Table of Contents
Section 6: Card Lamination Module.....................................................................................6-1
Table of Contents ....................................................................................................................................... 6-1
Reviewing the Card Lamination Module ................................................................................................... 6-2
Safety Messages (review carefully)............................................................................................................ 6-3
Opening the Card Lamination Module.................................................................................................. 6-4
Opening the Card Lamination Module (continued).......................................................................... 6-5
Adjusting the Card Lamination Module..................................................................................................... 6-6
Adjusting the Card Flattener.................................................................................................................. 6-6