FARGO electronics HDP600 - Setting up Email Event Logging

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
5-35
Setting up Email Event logging
Follow this procedure to enable logging using email notification:
Step Procedure (Specify email logging)
1
Select the System Log link.
2 Select the link for the log name you want to view or configure (the default
choices are log1 or log2).
3
Select the Email radio button to choose email log notification.
4 Enter a valid e-mail address in the associated textbox.
5
Select Submit.
6
Log in as a root User if you are so prompted. (Note: Any change of setting
will only be accepted after you have successfully logged in.)