FARGO electronics HDP600 - Section 8: Cleaning________________________________________________________8-1; Using the Required Supplies

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
8-2
Using the Required Supplies
For the maintenance procedures outlined for the Printer, you will need a Printer Cleaning Kit,
available from the reseller. This optional kit includes the following:
 Printhead Cleaning Pens pre-moistened with 99.99% isopropyl alcohol for cleaning the
Printer's Printhead.
 Cleaning Cards with an adhesive backing for cleaning the Printer's Cleaning Rollers.
 Cleaning Pads pre-moistened with 99.99% isopropyl alcohol for cleaning the Printer's
Platen Rollers, Card Feed Rollers and general inside and outside area.
Caution: As with any electronic device, internal components of the Printer, such
as the Printhead, may be damaged if exposed to static electrical discharges. To avoid
potential damage, always wear an appropriate personal grounding device, such as a wrist
strap (with integral resistor) connected to an ESD ground. At a minimum, make positive
contact with the bare metal chassis of the Printer with the hand prior to touching any internal
electrical components.