FARGO electronics HDP600 - Reviewing the Telnet Command Table (Continued)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
5-12
Reviewing the Telnet Command Table (continued)
Telnet Command Command Purpose Command Format
addr Store a new IP
address.
store net addr <ADDRESS>
mask Store a new address
mask.
store net mask <MASK>
gateway Store a new default
gateway.
store net gateway <ADDRESS>
dns Store a new DNS
server address.
store net dns <ADDRESS>
domain Store a new DNS
domain suffix.
store net domain <STRING>
opts Enable or disable
automatic address
assignment using
DHCP. Static (non-
automatic) addresses
will come from the
stored or default
settings, depending on
the other settings.
To enable automatic address
assignment:
store net opts dhcp
To disable automatic address
assignment:
store net opts -dhcp
net
from Restore the network
settings from either the
default settings or the
current settings.
store net from default|current
mode Specify the Ethernet
interface mode as:
automatic, full or half
duplex; 10 or 100 mHz.
store ifc mode
auto|10half|10full|100half|100full
store
ifc
from Set the Ethernet mode
settings from the
default or current
settings.
store ifc from default|current