RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
7-35
Using the Rotate Front 180 Degrees or Rotate Back 180 Degrees
options
Use this option to change the position of the printed image in relation to the set location of a
card's Magnetic Stripe or smart chip.
Step Procedure
1
Select the Rotate Front 180 Degrees option to rotate the image on the front
of the card by 180 degrees when printed.
OR
Select the Rotate Back 180 Degrees option to rotate the image on the back
of the card by 180 degrees when printed.
To Next Page
Loading...
