FARGO electronics HDP600 - Page 28

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
2-10
Technical Specifications (continued)
Term Description
Fargo Certified
Supplies
Fargo Card Printer/Encoder require highly specialized media to
function properly.
To maximize printed card quality and durability, Printhead life and
Printer/Encoder reliability, use only Fargo Certified Supplies, Fargo
warranties are void, where not prohibited by law, when non-Fargo
Certified Supplies are used.
HDP Film Options
 Clear, 1,250 prints
 Standard Holographic (only HDP600 and HDP600-LC)
 Custom Holographic, special order (only HDP600 and HDP600-
LC)
HDP Film
Storage
Temperature
77ºF (25ºC) or lower for no longer than 1.5 years.
Humidity 20% to 80% (non-condensing)
Input Hopper
Card Capacity
HDP600 and HDP600-LC:
 200 cards (.030/.762mm)
HDP600 CR100 and HDP600-LC CR100:
 100 cards (.030/.762mm)
Interface
 Centronics parallel, IEEE-1284 Compliant or USB 1.1
 Interfacing information for E-card Options
Maximum
Accepted Card
Width
2.125 in. to 2.63 in. (54mm to 67mm)
Maximum
Accepted Card
Length
3.375 in. to 3.88 in. (85.6mm to 98.5mm)