RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
9-12
Section 9: Packing the Card Printer
Important: The procedure in this section apply for the HDP600/HDP600-LC and
HDP600 CR100/HDP600-LC CR100 card Printers.
The purpose of this section to provide the User with a specific packing procedure for the
HDP600.
Follow this instruction to pack the Card Printer for transport.
Step Procedure
1 Clean the inside of the Printer with deionized air. Wipe it down with a lint-free
cloth.
2 Clean the Printhead with a Printhead pen.
3 Verify that the Latch is secure on the Lamination Arm.
4 Pack the Printer in the original carton and packing materials.
5 Be sure to enclose any necessary paperwork, test cards, etc.
To Next Page
Loading...
