RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
11-28
Using the Show Card Count option
Step Procedure
1
Use this option to view the total Card Count (CC), Pass Count (PC), Transfer
Count (TC).
The Card Count is the total number of cards the Printer has produced.
The Pass Count is the total number of print passes made by the Printhead.
(Note: A pass is measured each time a single Ribbon Panel is printed upon
beneath the Printhead.)
The Transfer Count is the total number of times the Printer transfers an
image to a card. In most cases, this information is only necessary for certain
warranty requirements, however, it can also be a helpful way to measure a
Printer's overall work cycle.)
To Next Page
Loading...
