Fargo HDP8500 - Page 38

HDP8500 Service Manual, PLT-01583, 1.1
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
38
Step
Procedure
5
Remove 1 screw (F000170) from the PCB station Transistion board ( D940171)
6
Remove 4 screws (F000170) from the PCB Flip Station Interface & IO board (D940195)
7
Remove all cable connections.
8
Lift off the Mainboard from the Base.
9
Reverse the instructions to re-assemble.
Refer to Appendix A for Cable Connection diagram.