Fargo HDP8500 - Page 54

HDP8500 Service Manual, PLT-01583, 1.1
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
54
Step
Procedure
14
Roller #3 Transport Roller (D940099)
Long end goes to the LEFT side.
Ensure the flat on the bearing is aligned with the flat in the Sideplate hole.
Verify roller rolls freely
15
Roller #4 Cleaning Roller (D940108) with bearing (760343)
Long end goes to the LEFT side.
Ensure the flat on the bearing is aligned with the flat in the Sideplate hole.
Remove the gear and clip 140048 to replace the roller
Reverse the instruction to re-assembly.