FARO
®
Laser Scanner Manual
126
Chapter 8: Special Scanning Modes
Error
No consistent solution could be determined.
Solution
Make sure that the tripod and the targets did not moving during the procedure.
Error
The SD card of the scanner could not be accessed.
Solution
Make sure that the SD card is inserted and that it is not write-protected and
has sufficient free space left (approximately 330MB).
Error
Communication with the scanner failed.
Solution
Make sure that the WLAN connection to the scanner is stable.
If this error appears when connecting to the scanner or applying the
compensation parameters, try to repeat the corresponding step.
To Next Page
Loading...
