Faro FocusM 70 - 6.6.3 Starting a Scan

FARO
®
Laser Scanner Manual
47
Chapter 6: Getting Started
Far Distances - Select this option when scanning outer spaces where the
scan surfaces are located at distances greater than 20 meters from the
scanner position. This setting is not recommended when scanning indoors.
Recommended Settings - Enables the Clear Contour and Clear Sky filters.
Disables Far Distance Optimization.
6.6.2 Scanning Parameters Overview
The following table shows the scanning parameters and net scan time for all
the resolution and quality settings that are available.
Resolution
Quality Mio. Pts
(full scan)
Net Scan
Time
Point Distance pt/360°
1/1 1x 699.1 0:15:19 1.5mm/10m 40,960
1/1 2x 699.1 0:29:38 1.5mm/10m 40,960
1/1 3x 699.1 0:58.16 1.5mm/10m 40,960
1/1 4x 699.1 1:55:32 1.5mm/10m 40,960
1/2 1x 174.8 0:04:35 3.1mm/10m 20,480
1/2 2x 174.8 0:08:09 3.1mm/10m 20,480
1/2 3x 174.8 0:15:19 3.1mm/10m 20,480
1/2 4x 174.8 0:29:38 3.1mm/10m 20,480
1/2 6x 174.8 1:55:32 3.1mm/10m 20,480
1/4 1x 43.7 0:01:54 6.1mm/10m 10,240
1/4 2x 43.7 0:02:47 6.1mm/10m 10,240
1/4 3x 43.7 0:04:35 6.1mm/10m 10,240
1/4 4x 43.7 0:08:09 6.1mm/10m 10,240
1/4 6x 43.7 0:29:38 6.1mm/10m 10,240
1/4 8x 43.7 1:55:32 6.1mm/10m 10,240
1/5 2x 28.0 0:02:09 7.7mm/10m 8,192
1/5 3x 28.0 0:03:17 7.7mm/10m 8,192
1/5 4x 28.0 0:05:35 7.7mm/10m 8,192
1/5 6x 28.0 0:19:20 7.7mm/10m 8,192
1/8 2x 10.9 0:01:27 12.3mm/10m 5,120
1/8 3x 10.9 0:01:54 12.3mm/10m 5,120
1/8 4x 10.9 0:02:47 12.3mm/10m 5,120
1/8 6x 10.9 0:08:09 12.3mm/10m 5,120
1/8 8x 10.9 0:29:38 12.3mm/10m 5,120
1/10 3x 7.0 0:01:34 15.3mm/10m 4,096
1/10 4x 7.0 0:02:09 15.3mm/10m 4,096
1/10 6x 7.0 0:05:35 15.3mm/10m 4,096
1/10 8x 7.0 0:19:20 15.3mm/10m 4,096
1/16 3x 2.7 0:01:13 24.5mm/10m 2,560