Faro FocusM 70 - Wet Cleaning by Water or Diluted Mild Soap Solution

FARO
®
Laser Scanner Manual
138
Chapter 9: Maintenance
1. Gently blow off particles from the optical surface.
2. Perform visual inspection.
3. Repeat dry cleaning as required.
4. Proceed with step 9.3.2.
9.3.2 Wet Cleaning by Water or Diluted Mild Soap Solution
Provide a rigid base, for example, table or transport box topside, as a safe
basis for the following cleaning procedure.
1. Remove laser scanner unit from tripod.
Figure 9-109: Transport box with laser scanner turned and laid on top, with the
mirror module facing outwards
2. Turn and lay down scanner on its long side.
3. Ensure that mirror is free to move and easily accessible for wet cleaning.
NOTICE
Damage of the scanner‘s mirrors and lenses
Avoid any direct contact with the optical surface at any time!