EasyManua.ls Logo

Faro FocusM 70 - 10.8 Deflection unit; 10.9 Ambient Conditions; 10.10 Notes

Faro FocusM 70
198 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FARO
®
Laser Scanner Manual
145
Chapter 10: Technical Data
10.8 Deflection unit
10.9 Ambient Conditions
10.10 Notes
1
Ranging error is defined as a systematic measurement error at around 10 m and 25 m,
one sigma.
2
Ranging noise is defined as a standard deviation of values about the best-fit plane for
measurement speed of 122,000 points/sec.
3
A noise-compression algorithm may be activated thereby compressing raw data noise
by a factor of 2 or 4. Subject to change without prior notice.
4
Ferromagnetic objects can disturb the earth magnetic field and lead to inaccurate
measurements.
5
2x150° - Homogeneous point spacing is not guaranteed.
Field of view:
(vertical/horizontal): 300°
5
/ 360°
Step size: (vertical/horizontal):0.009° (40,960 3D-Pixel
on 360°) / 0.009°
(40,960 3D-Pixel on 360°)
Max. vertical scan speed: 5,820 rpm or 97 Hz
Ambient Temperature: 5 °C - 40 °C
Extended operating
temperature:
-20 - 55°C
Low temperature operation: the scanner
must be powered on while internal tempera-
ture is at or above 15 °C
High temperature operation: additional
accessory required, further information on
request.
Humidity: Non-condensing
Altitude: < 2000 m

Table of Contents

Related product manuals