EasyManua.ls Logo

Faro FocusM 70 - Chapter 4: Safety Precautions; 4.1 Intended Use; 4.2 Improper Use; 4.3 Users

Faro FocusM 70
198 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FARO
®
Laser Scanner Manual
10
Chapter 4: Safety Precautions
Chapter 4: Safety Precautions
Please read this User's Manual carefully and completely and refer to it before
using the product. Pay close attention to all warnings and follow the
instructions step by step.
4.1 Intended Use
Please use the product with the operating conditions and limitations described
in this user manual.
4.2 Improper Use
Improper use means using the product other than described in this instruction
manual, or under operating conditions which differ from those described
herein.
Improper use of the product can impair the protection provided by the product,
and product damage or serious personal injury can be caused.
4.3 Users
In the interests of safety, the laser scanner and its accessories should only be
used by competent, suitably trained users after they have read and
understood this manual, and considered any hazard involved.
We recommend that operators participate in the trainings offered by FARO.
4.4 General Safety Information
CAUTION:
Do not open the housing. By opening the housing, serious personal injury
may be caused and you can damage the product, which will affect the
product's warranty.
Do not use parts which have not been supplied or recommended by FARO.
Only replacement parts authorized by FARO may be used according to the
instructions obtained from FARO.
Do not expose the FARO Laser Scanner and its accessories to extreme
temperatures. The ambient temperature must not be lower or higher than
given in the specifications. Do not use the FARO Laser Scanner near heat
sources such as radiators, heat registers, or other products (including
amplifiers) that produce heat.
Do not immerse the FARO Laser Scanner and its accessories into water.
Liquid in the product enclosure can lead to damage, fire, or electric shocks.

Table of Contents

Related product manuals