Faro FocusM 70 - 7.4.1 Scan Projects and Clusters

FARO
®
Laser Scanner Manual
68
Chapter 7: Controller Software
Projects/Clusters Select the current scan project, add new or edit existing projects. Tap to get a
list of all available projects.
See
Scan Projects and Clusters on page 68 for additional information
Profiles Select the current scan profile, create new or edit existing scan profiles.
See
Scan Profiles on page 75.
Operators Select the current scanner operator, create new or edit existing operators.
See
Factory Settings of HDR, Night Mode and Far Distances on page 78.
Sensors See
Sensors on page 81.
General Settings Opens the menu of the general scanner settings.
See
General Settings on page 88.
On-Site Registration See
On-Site Registration on page 100.
Service Opens the menu for scanner services, like firmware updates, backups or
viewing errors and warnings.
See
On-Site Registration on page 100.
7.4.1 Scan Projects and Clusters
The Projects/Clusters page displays the structure of your real scan projects. A
scan project can consist of a main project that has several sub-projects called
clusters. For example, if you are scanning a multi-level building as a project,
each floor of this building might represent one cluster and each of these floors
or clusters can have further clusters, for rooms.
The structure of the scan project might then be like this:
- Office building
- Floor 1
- Room 1
- Room 2
- Room 3
- Floor 2
- Room 1
- Room 2