ST100A Series Flow Meter OPERATION
Fluid Components International LLC 67
Command 46: Trim DAC Gain – Measured Current Chan #1 (in mA)
Ext. Measured Current Ch. #1 Level (20 mA GainDAC)
Actual Measured Current Ch. #1 Level (20 mA GainDAC)
See Table 17, page 74, for response code list.
Note: 1. The value returned in the response data bytes reflects the rounded or truncated value actually used by the device.
Note: 1. The value returned in the response data bytes reflects the value actually used by the device.
Command 50: Read Dynamic Variable Assignments
Device Variable assigned to the primary variable.
See Table 17 for response code list.
Command 51: Write Dynamic Variable Assignments
Device Variable assigned to the primary variable.
Device Variable assigned to the primary variable.
See Table 17 for response code list.
To Next Page
Loading...
Need help?
General
