Synchronizing
103
SYSTEM SYNC Synchronize with the FP Service.
Sending diagnostic data for service purposes
and updating the machine software, etc.
DISCOVERFP SYNC Synchronize with the customer portal.
Send the consumption data for convenient
display and analysis in the portal.
Receive updates on cost accounts, user
accesses and adverts, etc. that are available
in the portal.
Note
: During operation, PostBase Vision
automatically synchronizes with the portal
about every 5 minutes.
D
ATA UPLOAD Send the postal data prescribed to the
metered postal products.
Note: PostBase Vision automatically
transmits this data daily at midnight
(if PostBase Vision is not turned off) or
immediately after it is turned on.
Synchronize – possible functions and their meaning:
To Next Page
Loading...
