FP PostBase Vision - Standby (Sleep Mode)

PostBase Vision
38
Disconnecting the PostBase Vision from
mains
Caution! Make sure to always turn the
PostBase Vision off with the ON/OFF button
before disconnecting the PostBase Vision
from mains. Never pull the power plug or
separate the power supply in any other way
before the printing system has reached its
sealed position. This is the only way to prevent
drying up and to ensure a permanently high
print quality.
• Press the ON/OFF button for three sec-
onds to turn the PostBase Vision off.
When the illumination is off:
• Unplug the power plug from the power
socket.
4.2 Standby (Sleep mode)
If you do not use the mailing system for a
while, it automatically switches to Sleep
mode (standby).
The display is dark and the ON/OFF button is
illuminated in standby.
Briefly touch the display to “wake up”
PostBase Vision.
As an alternative, you can briefly press the
ON/OFF button.
3 seconds