FP PostBase Vision - Sound Signals

Advanced settings & system information
107
14.5 Sound signals
There are several different tones and sounds that accompany the actions on your
PostBase Vision mailing system. You can limit the scope of the sound signals to
certain events (messages, errors) or turn them off entirely.
• Open the M
ENU.
• Choose S
OUND SIGNALS.
PostBase Vision opens the setting menu for
the sound signals. The current setting is high-
lighted in color (light blue with a dark blue
bar).
• Tap the desired setting.
• Apply the displayed setting by tapping OK.
You can set the volume for the sound signals
on the bottom left of the display frame. Read
more about it in chapter 4.6 on page 48.
SOUND SIGNALS – possible settings and their meaning:
ALL Acknowledgment sound for each entry,
sound signals for messages, errors, etc.
Shutting down and waking up from stand-by,
turning off, among others, are accompanied
with a sound.
M
ESSAGES / ERRORS Sound signals for messages and errors,
acknowledgment sound for the scale once
the weight has been determined.
O
NLY ERRORS Sound signals for errors,
acknowledgment sound of scale.
OFF No sound signals.
Exceptions
: System start, setting the volume,
acknowledgment sound of scale.