Maintenance and care
129
Check print quality
Make sure PostBase Vision always produces
clean and legible meter imprints.
• Check the print quality. There must not be
any blurred or blank spots.
This illustration shows a perfect imprint.
When there are blurred or blank spots in the
imprint:
• Clean print system. Read chapter 16.3 on
page 125.
16.5 Print system: show ink level
The approximate ink level of the cartridge is shown by the icon in the menu bar (full,
75%, 50%, 25%, empty). With this feature, you can track ink consumption at a glance.
You can also view the ink level as a percentage in the I
NK CARTRIDGE menu.
• Open the M
ENU.
• Choose I
NK CARTRIDGE.
• Choose I
NFORMATION.
PostBase Vision displays the ink cartridge’s
filling level as a percentage.
To Next Page
Loading...
