FP PostBase Vision - Changing the Ink Cartridge

PostBase Vision
130
16.6 Changing the ink cartridge
PostBase Vision monitors the filling level of the ink cartridge and issues a message
when it must be replaced. We recommend that you always have a new ink cartridge
in stock.
Warning! The ink causes severe eye irritation and may cause an allergic skin
reaction. Ingestion of the ink can be damaging to your health.
• Please heed the labels for hazardous materials on the packaging and the
ink cartridge itself.
• Avoid contact with eyes.
• Avoid ingestion of the ink.
• Keep the ink cartridge out of the reach of children.
Caution! Heed the following hints to avoid damage to the print system:
• Do not yank the cartridge flap open. Run the C
HANGE CARTRIDGE function
from the INK CARTRIDGE menu. The flap then opens by itself.
• We recommend to use only approved FP equipment and FP original parts.
The manufacturer FP has established reliability, safety and applicability.
The manufacturer cannot assess the reliability, safety and applicability for
products not approved by FP, and therefore not vouch for such products.
• Always use a brand new ink cartridge.
Caution! There are ink residues on the old cartridges.
• Take care not to soil your skin, your clothes, or objects near by.
• Use a mat to place the ink cartridge.
Changing the ink cartridge
PostBase Vision will prompt you to replace
the cartridge when it is depleted.
• Confirm the message.
• Open the M
ENU.
• Choose I
NK CARTRIDGE.
• Choose CHANGE CARTRIDGE.
Note
: Do not lean on the flap of the print sys-
tem or otherwise hinder it from opening auto-
matically.