Metering
71
6.3.3.3 Setting the letter thickness
If you want to meter letters with a thickness of 0.24" - 0.4" (6-10 mm), use the
“thick letters” function of the feeder for the best results.
• In the Home screen, tap FEEDER.
PostBase Vision opens the pop-up
“Automatic Feeding”. On the button for letter
thickness, you see the current setting
(Normal or Thick.
• In the pop-up, tap on the button for the
letter thickness.
• Select N
ORMAL or THICK depending on the
letters you are metering.
The selected setting is highlighted in color
(light blue with a dark blue bar).
• Apply the displayed setting by tapping OK.
If “thick letters” is set, it takes PostBase Vision
significantly longer to process the letters.
Remember to reset the setting back to
N
ORMAL for an optimal processing speed.
“Letter thickness” button
To Next Page
Loading...
