The basics of operation
47
4.4 Setting the display angle
The display angle can be adjusted by using the motor. Simply press the sensitive
areas to the left and right of the icon on the display frame.
• Press and hold the desired function (raise /
lower) until the display is in the desired
position.
When turning off the unit, PostBase Vision
lowers the display to its home position. When
the unit is turned on, the display returns to the
set position.
4.5 Setting the display brightness
You can adjust the brightness to your preferences to ensure good legibility of the
display texts and best rendering of the contrasts. Simply press the sensitive areas to
the left and right of the icon on the display frame.
• Press and hold the desired function
(brighter / darker) until the display shows
the desired setting.
To Next Page
Loading...
