FP PostBase Vision - Standby Time; Product after Standby

Advanced settings & system information
109
14.8 Standby time
The PostBase Vision mailing system will go to standby automatically if it is not used
for some time. The standby time is the time between your last operation and the time
PostBase Vision automatically goes to standby.
• Open the M
ENU.
• Choose STANDBY SETTINGS.
• Choose S
TANDBY TIME.
PostBase Vision opens the standby time
setting menu.
• Type the desired time (in minutes).
• Confirm with OK.
14.9 Product after standby
This feature lets you define which product will be set for metering after reactivating
PostBase Vision from standby:
– the product stored as the first shortcut or
– the product that was last used.
• Open the M
ENU.
• Choose S
TANDBY SETTINGS wählen.
• Choose PROD. AFTER STANDBY.
PostBase Vision opens the setting menu for
this function.
• Tap the desired setting.
• Apply the displayed setting by tapping OK.
RATE AFTER STANDBY – possible settings and their meaning:
SHORTCUT 1 After reactivating PostBase Vision from stand-
by, the product stored as first shortcut is set.
L
AST RATE PostBase Vision keeps the current (last)
product setting.