PostBase Vision
148
16.10.2 Checking the liquid level and filling with sealing liquid
• Check the liquid level in the sealer
regularly.
Make sure the sealer is always filled at least
to the “min” mark to prevent the felts from
drying up. When felts with glue residues dry
up they harden to the point of becoming
prematurely useless.
Filling with sealing liquid
We recommend using the SEALIT sealing
liquid. This special sealing liquid is available
from Francotyp-Postalia.
• Swing the filler hole lid aside.
• Fill the sealer with SEALIT sealing liquid.
• Check the liquid level. The liquid level in
the sealer should roughly reach to the
“max” mark.
• Swing the filler hole lid back on.
• If necessary: dry the sealer outside.
To Next Page
Loading...
