PostBase Vision
8
1 For your safety
The PostBase Vision complies with the relevant safety regulations for information
technology equipment in office environments.
Before installing, commissioning and using the PostBase Vision mailing system,
please read this safety information carefully.
For your own safety, please observe the following instructions:
Proper use
• PostBase Vision is a digital mailing system with ink-jet print technology for
metering mail.
• The PostBase Vision mailing system is intended only for use in enclosed offices or
office-like environments. Observe the operating conditions specified in the “Tech-
nical Data” section.
• The PostBase Vision mailing system is intended exclusively for processing mail
pieces in accordance with the specifications described in the “Technical Data” section.
Prevention of electrical hazards
• Operate the PostBase Vision mailing system only on a grounded single-phase
power socket. Make sure that the power connection conforms to the power require-
ments indicated on the type plates.
• Make sure the sockets for connecting the PostBase Vision mailing system are
close by and easily accessible at all times.
• Unplug the PostBase Vision mailing system power plugs from the sockets in case
of an emergency.
• Take care to ensure that no foreign objects penetrate the PostBase Vision mailing
system interior.
• Be extremely careful when handling liquids.
• When refilling the sealing liquid, make sure that no live parts become wet.
• Unplug all power plugs of the PostBase Vision mailing system prior to cleaning the
mailing system.
Prevention of mechanical hazards
• Keep long hair, fingers, loose clothing pieces, neck ties, scarves, jewelry and the
like away from moving machine parts.
• Do not remove any parts of the housing.
• Do not remove any equipment related to safety or protection. Do not make them
inoperative or unable to function.
To Next Page
Loading...
