FP PostBase Vision - Auto off; Automatic Date Advance

PostBase Vision
110
14.10 Auto Off
PostBase Vision can be turned off automatically if you do not use PostBase Vision
for a while. The “AutoOff Time” is the length of time between the last operation and
when the system turns off automatically.
• Open the M
ENU.
• Choose S
TANDBY SETTINGS.
• Choose A
UTO OFF.
PostBase Vision opens the Auto Off Time
setting menu.
• Type the desired time (in minutes).
• Confirm with OK.
The value “0” disables the Auto Off function.
14.11 Automatic date advance
If you generally meter your mail for the next day (or the next posting date) after a cer-
tain time of day, the “Auto Date Advance” function can be very useful.
PostBase Vision will then remind you every day at the defined time to set the meter-
ing date.
• Open the M
ENU.
• Choose A
UTO DATE ADVANCE.
PostBase Vision displays the current setting
of the “Automatic date advance” feature.
To adjust the settings:
• Tap C
HANGE to open the procedure for
setting up the “Automatic date advance”
feature.