FP PostBase Vision - Correcting Faulty Meter Imprints; Postage Correction

PostBase Vision
78
6.5 Correcting faulty meter imprints
6.5.1 Postage correction
You can correct faulty meter imprints on an already metered letter. If you have
metered a postage which is too low, print a correction with the missing amount on the
non-address side of the mail piece.
Setting the CORRECTION imprint
In the Home screen:
• Tap postage.
PostBase Vision opens the product menu.
• Tap the S
PECIALS option
(is shown at the end of the list).
• Choose C
ORRECTION.
• Type the amount to be imprinted on the
mail piece in addition to the postage
already metered and confirm OK.
•C
ONFIRM the displayed product setting and
return to the Home screen.
Print postage correction
The Home screen shows the current settings
for the correction imprint. You can change
the settings (e.g. date, imprint offset) in the
same way as with a regular meter imprint.
• Position the mail piece the
non-address side face up
.
PostBase Vision prints the correction imprint.
When printing the postage correction,
advertising imprints are not available.