EasyManua.ls Logo

FP PostBase Vision - 6.3.3.2 Switch the Sealing Function on; off

FP PostBase Vision
196 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PostBase Vision
70
Fold the letter guide down
If the letter guide is in the way when feeding
large-sized mail pieces, you can fold the
letter guide down.
Carefully
pull out the letter guide up to the
stop.
Fold the letter guide down as shown in the
illustration and place it onto the tabletop.
Adjusting the incline of the ramp
Press the release key down to the left to
unlock the letter receiving tray.
Lift up the ramp or lower the release key to
fasten the ramp.
6.3.3.2 Switch the sealing function on / off
If the letters (up to a max. thickness of 0.3" /
7 mm) are to be sealed:
Set the seal / non seal switch to the rear, to
the seal position.
The sealing function is switched on. The LEDs
below the sealant tank flap light up brightly
.
If the letters are not to be sealed, or have
already been sealed:
Set the seal / non seal switch to the front in
the non seal position.
The sealing function is switched off. The LEDs
below the sealant tank flap are dimmed.

Table of Contents

Other manuals for FP PostBase Vision

Related product manuals