FP PostBase Vision - Access Control and Administrator PIN Management

Advanced settings & system information
105
14.3 Access control / Administrator PIN
You can protect the PostBase Vision mailing system from unauthorized use with a
PIN, the administrator PIN. If access control is enabled, PostBase Vision requests a
PIN to be entered when the system is turned on or wakes up from stand-by mode.
Setting up access control
• Open the M
ENU.
• Choose M
ANAGE PIN.
• Follow the instructions on the screen.
You must enter a four-digit PIN and enter it
a second time for verification.
S
AVE activates the access control.
You need this administrator PIN in the cus-
tomer portal as well to set up a user-specific
access control for your mailing system.
Disabling access control
• Open the M
ENU.
• Choose M
ANAGE PIN.
• Turn off access control by tapping Y
ES.
If a user-specific access control is set up in
the customer portal for your mailing system
as well, the “Manage Pin” menu function can
only be accessed with the Administrator PIN.