PostBase Vision
72
6.3.3.4 Feeding letters in stack and metering
Once the feeder has been set up (see chapter 6.3.3.1 to 6.3.3.3) and the desired
meter imprint is set (see chapter 5), you can start processing. PostBase Vision also
offers the option to define a unit quantity before metering. Read more about it in chap-
ter “Working with the batch counter” on page 74.
Caution! Automatic start-up. When the
PostBase Vision is ready for metering, the
letter transport starts up as soon as a letter is
placed on the feeder. Do not be startled.
You can start processing from the Home
screen or from the pop-up “Automatic
Feeding” simply by feeding a stack of letters.
• Swivel the pendulum upward.
PostBase Vision is ready for metering
To Next Page
Loading...
