Advanced settings & system information
111
• Follow the instructions in the display:
Set the time of day (when the window to
change the metering date should appear
daily) and choose the desired weekend
mode.
Or
Switch the function off.
PostBase Vision displays the selected set-
tings.
• If everything is correct: S
AVE.
The following table gives an overview of the
possible settings and their meaning.
AUTO DATE ADVANCE – possible settings and their meaning:
Current Setting
O
N PostBase Vision opens a window to set the
metering date every day at the set auto
advance time.
The following options are available to you:
– Apply the suggested date
– Select a different date
– Keep the current date.
O
FF The function is not enabled.
Auto Advance Time
HH:MM
(Time of day)
The time determines when the window to
change the metering date should appear in
the display.
Note
: Setting the time to 12:00 am (midnight)
switches the function off.
To Next Page
Loading...
