Advanced settings & system information
115
• Now, follow the information and instruc-
tions on the display step-by-step. Config-
ure the appropriate parameters for your
network. If necessary, ask your network
administrator.
PostBase Vision displays the selected
connectivity settings.
• Once everything is correct: S
AVE.
The following table gives an overview of the
possible settings and parameters.
Connectivity Settings and their meaning:
Connection Type
ETHERNET / LAN
(default setting)
LAN (Local Area Network) connection.
Use this setting if you want PostBase Vision to
use the wired connection to your local network /
router.
WI-FI Use this setting if you want PostBase Vision to
connect to the local network / router wirelessly.
SSID Service Set Identifier. Name of a local wireless
network(such as router name).
S
ELECT WI-FI Select the desired access point from the list of
detected Wi-Fi networks.
E
NTER SSID If the name of the desired network does not
appear in the list, select this option.
You must then enter the following parameters:
– Network name
– Select Encryption Mode (WPA2, WPA) or
Open Network.
Please contact you network administrator for
details.
To Next Page
Loading...
