PostBase Vision
168
• Push the white slider next to the power
socket on the PostBase Vision in the direc-
tion of the arrow and hold it. The catch
retracts and allows access to the security
device.
• Remove the security device out of its
mounting.
• Release the white slider.
Inserting the security device
• Push the white slider next to the power
socket on the PostBase Vision in the direc-
tion of the arrow and hold it. The catch
allows access to the security device
mounting.
• Insert the security device as shown in the
picture and push it all the way into the
mounting. You can feel it engage.
• Release the white slider.
• Close the cover of the security module slot
again.
• Reconnect the power cable.
You can now use the PostBase Vision again.
To Next Page
Loading...
