PostBase Vision
170
The connections / interfaces of the
PostBase Vision postage meter are
described in the figure on page 14.
Remove letter catch tray • Lift the front of the postage meter about 2"
(5 cm).
• Move the letter catch tray away to the right.
• Put the postage meter back down.
Remove PostBase Vision from feeder To feed mail pieces, the hand feed tray or
the sealer or
the feeder are positioned to the
left of the postage meter.
The housings of the postage meter and the
feeding device in use are mechanically cou-
pled via catches (on the right side of the feed-
ing device) and slots (in the postage meter’s
housing).
• Carefully lift the postage meter at the hous-
ing and remove it from the feeding device
at hand.
• Place the postage meter on a firm, level
base.
To Next Page
Loading...
