FP PostBase Vision - Page 24

PostBase Vision
24
Warning! Danger from electrical voltage if
improperly connected.
• Use the supplied power and connection
cables or cables that have been approved
by Francotyp-Postalia. Make sure that the
cables are not damaged.
• Only connect the PostBase Vision to a
grounded single-phase power socket.
Make sure that the power connection con-
forms to the power requirements indicated
on the type plate.
• Make sure that the power socket is nearby
and easily accessible at all times.
Connection
Computer Network / Router
If you want the PostBase Vision to use the
wired connection to your local area network
(LAN):
• Connect the Ethernet cable to the postage
meter and the local network / router.
Power connection (electric) • Plug the power cable into the power
connection for the postage meter.
• Only then plug the power cable into the
power socket.
Ethernet cable
Power cable